3D Drawing Pen with ABS and PLA Compatibility, Nozzle, Stepless Speed Control and LED Indicators

Draw in the Air and Build Real Objects with This 3D Printing Pen

You sketch the same idea over and over on paper but it never looks like the thing in your head. Flat drawings can't capture depth, and there's no way to hold what you've imagined. This 3D printing pen lets you draw upward through the air and build actual three-dimensional objects at your desk, in class, or at the kitchen table.

You load a filament strand into the back, and the pen heats it up and pushes melted plastic through the nozzle as you move your hand. The red LED confirms the pen is on, the green light flashes while it heats, and a solid green means it's ready to go. A stepless speed slider on the side lets you dial the flow from slow and precise to fast and generous.

The nozzle uses an seal to stay clog-resistant during long drawing sessions. It works with both ABS and PLA filament, and you switch between them by adjusting the temperature manually. The nozzle is also replaceable, so you can keep the pen running long-term without buying a whole new one.

The pen runs on 100 to 240 volts AC at 50 or 60 Hz, drawing 10 watts and operating at 5 volts DC with a 2 amp output. It's FCC, CE, and RoHS certified for verified safety and material standards. The slim, shaped grip fits naturally in your hand and helps keep things steady during longer creative sessions without feeling bulky.

• DUAL FILAMENT SUPPORT: Manual temperature adjustment lets you switch between ABS and PLA filament for different project types and needs.
  
  
• STEPLESS SPEED CONTROL: Side slider adjusts material flow from slow and detailed to fast and filled for any creative task you tackle.
  
  
• LED STATUS INDICATORS: Red signals power on, green flashes during heating, and solid green confirms the pen is fully ready to draw.
  
  
• REPLACEABLE NOZZLE DESIGN: Swap out the nozzle when needed and keep the pen working reliably over time without replacing the entire unit.
  
  
• UNIVERSAL POWER INPUT: Runs on 100 to 240 volts AC at 10 watts so it works with standard outlets in most countries and regions.
  
  
• ERGONOMIC SLIM GRIP: The slim shaped body fits naturally in your hand and helps reduce strain during longer drawing and building sessions.
  
  
• CERTIFIED SAFETY STANDARDS: FCC, CE, and RoHS certified for verified safety and material standards so you can create with peace of mind.

3D PRINTING PEN SPECS

• Power Input: 100 to 240V AC, 50/60Hz
  
  
• Output: 10W
  
  
• DC Operation: 5V / 2A
  
  
• Compatible Materials: ABS, PLA
  
  
• Speed Control: Stepless Slider
  
  
• Temperature: Manual Adjustment
  
  
• Indicators: Red and Green LED
  
  
• Design: Slim Ergonomic
  
  
• Use: Indoor and Outdoor
  
  
• Certifications: FCC, CE, RoHS

PACKAGE INCLUDES:

• 1 x 3D Printing Pen
  
  
• 1 x AC Adapter
  
  
• 3 x PLA Filament Colors